H3C Technologies H3C SecPath F1000-E User Manual
Page 534
26
•
Select policy from the Policy Name drop-down list and then click Add Relation. Perform
configuration on the page shown in
.
Figure 27 Configure class-behavior associations for the policy named policy
•
Select classifier_server from the Classifier Name drop-down list.
•
Select behavior_server from the Behavior Name drop-down list.
•
Click Apply.
•
Select policy from the Policy Name drop-down list and then click Add Relation. Perform
configuration on the page shown in
.
•
Select classifier_host from the Classifier Name drop-down list.
•
Select behavior_host from the Behavior Name drop-down list.
•
Click Apply.
Step5
Apply the policy to an interface
# Apply the policy named policy to the incoming packets of GigabitEthernet 0/1.
•
Select Firewall > Traffic Policing > Apply from the navigation tree, and click Apply Policy.
Perform configuration on the page shown in
.
Figure 28 Apply the policy named policy to the incoming packets of GigabitEthernet 0/1
•
Select GigabitEthernet 0/1 from the Interface Name drop-down list.
•
Select policy from the Policy Name drop-down list.
•
Select Inbound from the Direction drop-down list.
•
Click Apply.