N in, Figure 10 – H3C Technologies H3C SecPath F1000-E User Manual
Page 398
8
Figure 10 Create VLANs
•
Enter VLAN IDs 2, 6-50, and 100.
•
Click Apply.
# Configure VLAN 100 as the default VLAN of GigabitEthernet 0/1. By default, all ports are access ports
and their default VLANs are all VLAN 1.
•
Select Network > VLAN > Port from the navigation tree, click the icon corresponding to port
GigabitEthernet 0/1 in the Operation column, and then make the following configurations, as
shown in
Figure 11 Configure the default VLAN of GigabitEthernet 0/1.
•
Select the Untagged option for Member Type.
•
Enter VLAN ID 100.
•
Click Apply.
# Configure GigabitEthernet 0/1 as a hybrid port and assign it to VLAN 2 and VLANs 6 through 50 as
an untagged member.
•
Click the icon corresponding to GigabitEthernet 0/1 in the Operation column and make the
following configurations, as shown in
.