H3C Technologies H3C SecPath F1000-E - Manual (Page 578)

14
Table 7 describes the items of the session statistics based on IP address
Table 7 Items of IP address based session statistics
Item Description
Total Connection Count Total number of current connections
Total Connection Rate Connection establishment rate in a 5-second sampling interval
TCP Connection Count
Total number of TCP half-open connections, TCP half-close connections, and
full TCP connections
TCP Half-Open Connection
Count
Number of TCP half-open connections
TCP Half-Close Connection
Count
Number of TCP half-close connections
TCP Connection Rate TCP connection establishment rate in a 5-second sampling interval
UDP Connection Count Number of full UDP connections
UDP Connection Rate UDP connection establishment rate in a 5-second sampling interval
ICMP Connection Count Number of full ICMP connections
ICMP Connection Rate ICMP connection establishment rate in a 5-second sampling interval
RAWIP Connection Count Number of current RAWIP connections
RAWIP Connection Rate RAWIP connection establishment rate in a 5-second sampling interval
Return to Displaying session statistics .
Configuration Guidelines
When configuring session management, note that:
• If the number of sessions is too large, for example, more than 800,000 sessions, you are not
recommended to set small values for aging times of the protocol states and application layer
protocols. Otherwise, the responses of the console will be slow.
• Only TCP sessions in the ESTABLISHED state can be specified as persistent sessions.