H3C Technologies H3C SecPath F1000-E - Manual (Page 149)

2
• Uses digital certificates to verify servers to prevent clients from accessing unauthorized servers, thus
protecting significant information such as administrator account information.
Configuring Service Management
Select Device Management > Service Management from the navigation tree to enter the service
management configuration page, as shown in
Figure 1 .
Figure 1 Service management
Table 1 shows the detailed configuration for service management.
Table 1 Service management configuration items
Item Description
Enable FTP
service
Specify whether to enable the FTP service.
The FTP service is disabled by default.
FTP
ACL
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service Specify whether to enable the Telnet service.
The Telnet service is disabled by default.
SSH
Enable SSH
service Specify whether to enable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service
Specify whether to enable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
HTTP
Enable HTTP
service Specify whether to enable the HTTP service.
The HTTP service is disabled by default.