H3C Technologies H3C SecPath F1000-E - Manual (Page 668)

10
• When Setting Filter – OK appears on the progress dialog box, click Close.
# Create a policy, and associate the created classifier with the created behavior in the policy.
• Select Firewall > QoS > Policy from the navigation tree and click Add. Perform configuration
as shown in Figure 15 .
Figure 15 Create a QoS policy
• Type policy1 as the policy name, and then click Apply.
• As shown in Figure 16 , select policy1 from the Policy Name drop-down list.
Figure 16 Configure a QoS policy
• Click Add Relation, and perform the configuration as shown in Figure 17 .
Figure 17 Associate a class with a behavior in the QoS policy
• Select class1 from the Classifier Name drop-down list and behavior1 from the Behavior
Name drop-down list, and then click Apply.