H3C Technologies H3C SecPath F1000-E - Manual (Page 157)

10
Figure 13 Retrieve the certificate
• Select 1 as the PKI domain.
• Select CA as the certificate type.
• Click Apply.
# Request a local certificate.
• Select VPN > PKI > Certificate from the navigation tree and then click Request Cert to perform
the configurations as shown in
Figure 14 .
Figure 14 Request a certificate
• Select 1 as the PKI domain.
• Click Apply. When the system displays “Certificate request has been submitted”, click OK.
# Enable HTTPS service and associate HTTPS service with PKI domain 1.
• Select Device Management > Service Management from the navigation tree to enter the
service management configuration page, as shown in
Figure 15 .