H3C Technologies H3C SecPath F1000-E - Manual (Page 209)

16
Table 8 Configuration items of configuring an MST region
Item Description
Region Name
MST region name
The MST region name is the bridge MAC address of the device by default.
Revision Level Revision level of the MST region
Instance ID ID of the MSTI to be configured
VLAN ID VLAN IDs to be mapped to the MSTI Manual
Apply Add the VLAN-to-MSTI mappings to the VLAN-to-MSTI mapping table
Modulo
Set the modulo value based on which 4094 VLANs are mapped to the
corresponding MSTIs
Activate Validate the VLAN-to-MSTI mappings, the region name, and the revision level
Return to
MSTP configuration task list .
Configuring MSTP Globally
Select Network > MSTP > Global from the navigation tree to enter the Global MSTP
Configuration page, as shown in
Figure 8 .