H3C Technologies H3C SecPath F1000-E - Manual (Page 863)

5
• Select High Reliability > Collaboration Group from the navigation tree of Device B, and
click the icon corresponding to Collaboration Group 1. The page shown in
Figure 4 appears.
Figure 4 Assign GigabitEthernet 0/0 and GigabitEthernet 0/1 to Collaboration Group 1
• Select the check boxes in front of GigabitEthernet 0/0 and GigabitEthernet 0/1.
• Click Apply to confirm the operation.
Verifying the configuration
# Unplug the cable connecting Device A to GigabitEthernet 0/0 on Device B, and check the status of
Collaboration Group 1 and its member ports.
• Select High Reliability > Collaboration Group from the navigation tree of Device B, and
check the status of Collaboration Group 1. The status of Collaboration Group 1 is Down, as shown
in Figure 5 .