H3C Technologies H3C SecPath F1000-E - Manual (Page 43)

3
Figure 2 Basic configuration wizard: 2/6 (basic information)
Table 1 describes the basic information configuration items.
Table 1 Basic information configuration items
Item Description
Sysname Set the system name.
Modify Current User
Password
New Password
Confirm Password
Specify whether to modify the login password of the current user.
To modify the password of the current user, set the new password and the confirm
password, and the two passwords must be identical.
IMPORTANT:
You can modify the password of a user authenticated by local authentication only
and cannot modify that of a user authenticated by remote authentication. If the
name of a user authenticated by local authentication and that of a user
authenticated by remote authentication are duplicated, your modification is only
effective to the user authenticated by local authentication.
Configuring Service Management
Click Next on the basic information configuration page to enter the service management page, as
shown in Figure 3 .