H3C Technologies H3C SecPath F1000-E - Manual (Page 142)

8
Figure 11 Add VLAN members to VD_A
• Find VD_A from the Virtual Device column.
• Click the corresponding icon in the Operation column.
• Type VLAN ranges “100-205, 300-310”.
• Click Apply.
# Add VLAN members to VD_B.
• Select Device Management > Virtual Device > VLAN from the navigation tree to enter the
page shown in
Figure 12 .
Figure 12 Add VLAN members to VD_B
• Find VD_B from the Virtual Device column.
• Click the corresponding icon in the Operation column.
• Type VLAN ranges “50-80,400,500-530”.
• Click Apply.