H3C Technologies H3C SecPath F1000-E User Manual
Page 426
18
Figure 14 Configure the scheme for communication between the device and the RADIUS server
•
Select extended as the server type.
•
Select the Authentication Server Shared Key check box and enter expert in the text box.
•
Enter expert in the Confirm Authentication Shared Key text box.
•
Select the Accounting Server Shared Key check box and enter expert in the text box.
•
Enter expert in the Confirm Accounting Shared Key text box.
•
Select with-domain for the username format.
•
Click Apply to finish the configuration.
Perform the following configuration in the command line interface of the device:
# Enable the Telnet service on the device.
[Device] telnet server enable
# Configure the device to use AAA for Telnet users.
[Device] user-interface vty 0 4
[Device-ui-vty0-4] authentication-mode scheme
[Device-ui-vty0-4] quit
# Configure the AAA methods for domain bbb. As RADIUS authorization information is sent to the
RADIUS client in the authentication response messages, be sure to reference the same scheme for user
authentication and authorization.
[Device] domain bbb
[Device-isp-bbb] authentication login radius-scheme system