H3C Technologies H3C SecPath F1000-E - Manual (Page 26)

25
Figure 6 Advanced search
Take the ARP table shown in
Figure 4 as an example. If you want to search for the ARP entries with
interface being GigabitEthernet 0/3, and IP address range being 192.168.1.50 to 192.168.1.59, follow
these steps:
1. Click the Advanced Search link, specify the search criteria on the advanced search page as
shown in
Figure 7 , and click Apply. The ARP entries with interface being GigabitEthernet 0/3 are
displayed.
Figure 7 Advanced search function example (I)
2. Click the Advanced Search link, specify the search criteria on the advanced search page as
shown in
Figure 8 , and click Apply. The ARP entries with interface being GigabitEthernet 0/3
and IP address range being 192.168.1.50 to 192.168.1.59 are displayed as shown in Figure 9 .