H3C Technologies H3C SecPath F1000-E - Manual (Page 842)

13
VRRP Configuration Examples
Single VRRP Group Configuration Example
Network requirements
• As shown in Figure 10 , Host A needs to access Host B on the Internet, using 202.38.160.111/24 as
its default gateway.
• Device A and Device B belong to VRRP group 1 with the virtual IP address of 202.38.160.111/24.
• If Device A operates normally, packets sent from Host A to Host B are forwarded by Device A; if
GigabitEthernet 0/2 connecting Device A with the Internet becomes unavailable, packets sent from
Host A to Host B are forwarded by Device B.
Figure 10 Network diagram for single VRRP group configuration
Configuration procedure
Step1 Configure Device A
# Configure the IP address of each interface and the zones. The detailed configuration is omitted here.
# Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as 202.38.160.111.
• Select High Availability > VRRP from the navigation tree to enter the VRRP interfaces page.
Click the icon corresponding to GigabitEthernet 0/1 to enter the VRRP Configuration on
Interface page, as shown in
Figure 11 .