H3C Technologies H3C SecPath F1000-E - Manual (Page 803)

29
Figure 32 Generate an RSA key pair
• Click Apply to generate an RSA key pair.
# Retrieve the CA certificate.
• Select VPN > PKI > Certificate from the navigation tree and then click Retrieve Cert to
perform the configurations shown in Figure 33 .
Figure 33 Retrieve the CA certificate
•
• Select 1 as the PKI domain.
• Select CA as the certificate type.
• Click Apply.
# Request a local certificate.
• Select VPN > PKI > Certificate from the navigation tree and then click Request Cert to perform
the configurations shown in Figure 34 .
Figure 34 Request a local certificate
• Select 1 as the PKI domain.
• Click Apply. When the system displays “Certificate request has been submitted”, click OK to
confirm.