Configuration procedure – H3C Technologies H3C SecPath F1000-E User Manual
Page 457
16
Configuration procedure
# Configure an ACL to permit internal users in subnet 10.110.10.0/24 to access the Internet.
•
Select Firewall > ACL from the navigation tree, click Add, and then perform the following
operations, as shown in
.
Figure 14 Define ACL 2001
•
Type 2001 in ACL Number.
•
Select Config in Match Order.
•
Click Apply.
•
Click the icon in the Operation column corresponding to ACL 2001 to enter the ACL 2001
configuration page, click Add, and then perform the following operations, as shown in
.
Figure 15 Configure ACL 2001 to permit users on network 10.110.10.0/24 to access the Internet
•
Select Permit in Operation.
•
Select the Source IP Address checkbox and then type 10.110.10.0.
•
Type 0.0.0.255 in Source Wildcard.
•
Click Apply.
•
Click Add on the ACL 2001 configuration page and perform the following operations, as shown
in
.