H3C Technologies H3C SecPath F1000-E - Manual (Page 521)

13
Figure 9 Create a classification rule for a class
Table 4 describes the configuration items of configuring a classification rule.
Table 4 Configuration items of configuring a classification rule
Item Description
Classifier Name Displays the name of the class you are configuring.
ACL
Define an ACL-based match criterion, and specify the
ACL by number.
You can select or input an ACL number. The available
ACLs are those configured in Firewall > ACL. For
how to configure an ACL, see ACL Configuration.
IMPORTANT:
If the specified ACL does not exist, the match
criterion can be configured successfully, but does
not take effect.
Protocol group
Define a criterion to match a protocol group, and
specify the protocol group ID.
The available protocol groups are those configured in
Identification > P2P Identify > Protocol
Group. For how to configure a protocol group, see
P2P Traffic Control Configuration.
IMPORTANT:
If the specified protocol group ID does not exist, the
match criterion can be configured successfully, but
does not take effect.
Source MAC Address
Define a criterion to match the specified source MAC
address.
IMPORTANT:
A criterion to match a source MAC address is
applicable only to Ethernet interfaces.