H3C Technologies H3C SecPath F1000-E User Manual
Page 387
19
•
After logging in to the Web interface of Device C, select Network > Routing Management
> Multicast Routing from the navigation tree to enter the Global Configuration page.
•
Select Enable from the drop-down list to enable multicast routing.
•
Click Apply.
•
Select Network > Routing Management > PIM from the navigation tree to enter the
Interface Configuration page.
•
Click the icon corresponding to GigabitEthernet 0/0 to enter its configuration page.
•
Specify the working mode as PIM-DM and click Apply.
•
Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page.
•
Specify the working mode as PIM-DM and click Apply.
•
Click the icon corresponding to GigabitEthernet 0/2 to enter its configuration page.
•
Specify the working mode as PIM-DM and click Apply.
Step3
Verify the configuration
# View the PIM neighbor information on Device C.
After logging in to the Web interface of Device C, select Network > Routing Management > PIM
from the navigation tree and click Neighbor Information to enter the page as shown in
.
Figure 16 PIM neighbor information