H3C Technologies H3C SecPath F1000-E - Manual (Page 901)

36
Figure 36 Modify logical link
To enable slow-offline of the logical link, select the Enable Slow-Offline check box, and then click
Apply. After slow-offline is enabled, you can view the link load balancing statistics, and then remove
the corresponding physical link from the cluster after the original services of the logical link are
processed.
Return to
Outbound link load balancing configuration task list .
Creating a Virtual Service
Select High Reliability > Load Balance > Link Load Balance > Outbound from the
navigation tree, and then click the Virtual Service tab to enter the page as shown in
Figure 37 . Click
Add, and you can enter the page for creating a virtual service, as shown in Figure 38 .
Figure 37 Virtual service