Table 3 – H3C Technologies H3C SecPath F1000-E User Manual
Page 52
3
Table 3 Configuration items on page 2/7 of the firewall policy configuration wizard
Item Description
Filter Action
Specify the action to be taken for packets matching the rule:
•
Permit: Allows matched packets to pass.
•
Deny: Drops matched packets.
VPN Instance
Specify the VPN instance for the firewall policy.
Step6
Click Next to enter the third page of the firewall policy configuration wizard, as shown in
.
Figure 3 Firewall policy configuration wizard: 3/7
Step7
Configure the items on the page. See
for descriptions of the configuration items.
Table 4 Configuration items on page 3/7 of the firewall policy configuration wizard
Item Description
Source IP Address
(Group)
Specify the source address or source address group resource for the firewall policy.
Destination IP Address
(Group)
Specify the destination address or destination address group resource for the firewall
policy.
Step8
Click Next to enter the fourth page of the firewall policy configuration wizard, as shown in
.