H3C Technologies H3C SecPath F1000-E - Manual (Page 399)

9
Figure 12 Assign GigabitEthernet 0/1 to VLAN 2 and VLANs 6 through 50 as an untagged member
• Select the Untagged option for Member Type.
• Enter VLAN IDs 2, 6-50.
• Click Apply. A dialog box appears telling you that the access port will be changed into a hybrid
port.
• Click OK in the dialog box.
# Assign GigabitEthernet 0/1 to VLAN 100 as a tagged member.
• Select Network > VLAN > VLAN from the navigation tree.
• Enter 100 in the VLAN Range text box.
• Click Select. The page is as shown in Figure 13 .
Figure 13 VLAN configuration page
• Click the icon corresponding to VLAN 100 in the Operation column and make the following
configuration on the page shown in Figure 14 .