H3C Technologies H3C SecPath F1000-E - Manual (Page 237)

6
Figure 6 Create a dynamic address pool
Table 2 describes dynamic address pool configuration items.
Table 2 Dynamic address pool configuration items
Item Description
IP Pool Name Type the name of a dynamic address pool.
IP Address
Mask
Type an IP address segment for dynamic allocation.
To avoid address conflicts, the DHCP server excludes the IP addresses
used by gateways or FTP servers from dynamic allocation.
You can type a mask length or a mask in dotted decimal notation.
Unlimited
Lease
Duration
days/hours/minutes
Configure the address lease duration for the address pool.
Unlimited indicates the infinite duration.
Client Domain Name
Type the domain name suffix for the client.
With the suffix assigned, the client only needs to input part of a domain
name, and the system will add the domain name suffix for name
resolution.
Gateway Address
Type the gateway addresses for the client.
DHCP clients that want to access hosts outside the local subnet request
gateways to forward data. You can specify gateways in each address
pool for clients and the DHCP server will assign gateway addresses
while assigning an IP address to the client.
Up to eight gateways can be specified in a DHCP address pool,
separated by commas.