H3C Technologies H3C SecPath F1000-E - Manual (Page 570)

6
Item Description
ACL
Specify the ID of an ACL
Only one ACL can be referenced as the long-term session rule, and
the last referenced ACL takes effect. If no ACL is specified, long-term
sessions are not allowed.
To configure an ACL, select Firewall > ACL from the navigation
tree. For more information, see ACL in the Firewall Web
Configuration Manual.
Session Aging Time
Set the aging time of persistent sessions.
The value of 0 means that the persistent sessions will not be aged.
SYN_SENT State
and SYN_RCV State
Aging Time
Specify the SYN_SENT state and SYN_RCV state aging time for TCP
FIN_WAIT State
Aging Time
Specify the FIN_WAIT state aging time for TCP
TCP Protocol
ESTABLISHED State
Aging Time
Specify the ESTABLISHED state aging time for TCP
OPEN State Aging
Time
Specify the OPEN state aging time for UDP
UDP Protocol
READY State Aging
Time
Specify the READY state aging time for UDP
OPEN State Aging
Time
Specify the OPEN state aging time for ICMP
ICMP Protocol
CLOSED State
Aging Time
Specify the CLOSED state aging time for ICMP
Aging
Accelerate
Queue
Accelerate Queue
Aging Time
Specify the accelerate queue aging time
OPEN State Aging
Time
Specify the OPEN state aging time for RAW IP
RAWIP
Protocol
READY State Aging
Time
Specify the READY state aging time for RAW IP
DNS Session Aging Time Specify the DNS session aging time
FTP Session Aging Time Specify the FTP session aging time
MSN Session Aging Time Specify the MSN session aging time