H3C Technologies H3C SecPath F1000-E - Manual (Page 507)

5
Configuring Fixed ARP
NOTE:
•
The static ARP entries resulting from conversion are the same with those manually configured.
• The number of dynamic ARP entries that can be converted into static ones is limited by the number of
static ARP entries supported on the device. Some dynamic ARP entries may not be converted to static
ones due to the limit.
• The fixing process may take some time, during which some dynamic entries may be added or aged
out. The newly added dynamic entries will be fixed and the aged ones will not.
Select Firewall > ARP Anti-Attack > Fix from the navigation tree to enter the fixed ARP
configuration page, as shown in
Figure 13 . The page lists all static ARP entries, including manually
configured ones and fixed ones, and all dynamic ARP entries.
Figure 13 Fixed ARP page
• Click Fix All to convert all dynamic ARP entries to static ones.
• Click Del All Fixed to delete all static ARP entries.
• Select the checkbox before dynamic ARP entries, and click Fix to convert the selected ARP entry to
a static ARP entry.
• Select the checkbox before static ARP entries, and click Del Fixed to delete the selected static ARP
entry. If you select a dynamic one and click Del Fixed, the entry will not be deleted.