H3C Technologies H3C SecPath F1000-E User Manual
Page 491
13
Figure 11 Create an ACL
•
Type the ACL number 2000.
•
Select the match order Config.
•
Click Apply.
# Create a rule to allow Host A to access Device.
•
From the ACL list, select ACL 2000 and click the corresponding icon in the Operation
column. Then, on the page click Add to enter the ACL rule configuration page. Create an ACL rule
as shown in
.
Figure 12 Configure a rule to allow Host A to access Device
•
Select Permit from the Operation drop-down box.
•
Select the Source IP Address check box and type 192.168.1.2 and 0.0.0.0 respectively in
the following text boxes.
•
Click Apply.
# Create a rule to deny access of other hosts to Device on Saturday and Sunday.
•
On the page displaying the rules of ACL 2000, click Add. Create an ACL rule as shown in
.