H3C Technologies H3C SecPath F1000-E User Manual
Page 913
48
Figure 52 Create the physical link corresponding to ISP1
•
Type the link name ISP1.
•
Type the next hop 202.0.0.1.
•
Click Apply.
# Create the physical link corresponding to ISP2.
•
Click Add on the Physical Link tab page to perform the following configurations, as shown in
.
•
Type the link name ISP2.
•
Type the next hop 100.0.0.1.
•
Click Apply.
# Create logical link group LogicalLinkGrp and adopt the bandwidth scheduling algorithm.
•
Select High Reliability > Load Balance > Link Load Balance > Outbound from the
navigation tree, and you will enter the Logical Link Group tab page. Then click Add to perform
the following configurations, as shown in
.
Figure 53 Create logical link group LogicalLinkGrp
•
Type the logical link group name LogicalLinkGrp.
•
Select the Bandwidth scheduling algorithm.
•
Click Apply.
# Create logical link LogicalLink1 corresponding to ISP1.