H3C Technologies H3C SecPath F1000-E - Manual (Page 440)

11
Verification
On the telnet client, type the username in the format of userid@bbb and the password, then you can go
into the user interface of the Device.
Configuration Guidelines
When configuring the HWTACACS client, note that:
1. Except for deleting HWTACACS schemes and changing the IP addresses of the HWTACACS
servers, you can make any changes to HWTACACS parameters, no matter whether there are
users online or not.
2. HWTACACS authentication must work with HWTACACS authorization. If only HWTACACS
authentication is configured but HWTACACS authorization is not, users cannot log in.
3. You can remove an authentication/authorization/accounting server only when no active TCP
connection for sending authentication/authorization/accounting packets is using it.
4. At present, HWTACACS does not support accounting for FTP users.