beautypg.com

Verifying the configurations – H3C Technologies H3C SecPath F1000-E User Manual

Page 219

background image

26

Select MSTP in the Mode drop-down list.

Select the check box before Instance.

Set the Instance ID field to 3.

Set the Root Type field to Primary.

Click Apply.

Step4

Configure Device C.

# Enter MST region view, configure the MST region name as example, map VLAN 10, VLAN 30, and
VLAN 40 to MSTI 1, MSTI 3, and MSTI 4 respectively, and configure the revision level of the MST region

as 0. (The procedure here is the same as that of configuring an MST region on Device A.)
# Enable MSTP globally and configure the current device as the root bridge of MSTI 4.

Select Network > MSTP > Global from the navigation tree, and make the following
configurations on the page similar to that shown in

Figure 13

.

Select Enable in the Enable STP Globally drop-down list.

Select MSTP in the Mode drop-down list.

Select the check box before Instance.

Set the Instance ID field to 4.

Set the Root Type field to Primary.

Click Apply.

Step5

Configure Device D.

# Enter MST region view, configure the MST region name as example, map VLAN 10, VLAN 30, and

VLAN 40 to MSTI 1, MSTI 3, and MSTI 4 respectively, and configure the revision level of the MST region
as 0. (The procedure here is the same as that of configuring an MST region on Device A.)
# Enable MSTP globally.

Select Network > MSTP > Global from the navigation tree, and make the following

configurations on the page similar to that shown in

Figure 13

.

Select Enable in the Enable STP Globally drop-down list.

Select MSTP in the Mode drop-down list.

Click Apply.

Verifying the configurations

You can use the display stp brief command to display brief spanning tree information on each device

after the network is stable.
# Display brief spanning tree information on Device A.

[DeviceA] display stp brief

MSTID Port Role STP State Protection

0 GigabitEthernet0/1 ALTE DISCARDING NONE

0 GigabitEthernet0/2 DESI FORWARDING NONE

0 GigabitEthernet0/3 ROOT FORWARDING NONE

1 GigabitEthernet0/1 DESI FORWARDING NONE

1 GigabitEthernet0/3 DESI FORWARDING NONE

3 GigabitEthernet0/2 DESI FORWARDING NONE

3 GigabitEthernet0/3 ROOT FORWARDING NONE

This manual is related to the following products: