H3C Technologies H3C SecPath F1000-E - Manual (Page 877)

12
Figure 13 Global configuration
Table 2 describes the configuration items for configuring global parameters.
Table 2 Global parameters configuration items
Item Description
Keep Last-hop
Information
Set whether to enable the saving last hop information function.
Enabling of this function can ensure that response packets can be returned on the original
path. This function must be enabled on level 2 LB devices in firewall load balancing.
Return to
Server load balancing configuration task list .
Creating a Real Service Group
Select High Reliability > Load Balance > Server Load Balance from the navigation tree, and
you will enter the Real Service Group tab page, as shown in
Figure 14 . Click Add to enter the real
service group configuration page, as shown in Figure 15 .
Figure 14 Real service group
TIP:
If you click the Number of Real Services link of a real service group, the page will go to the Real Service
tab page, which displays only the information about the real services that belong to the real service group.