H3C Technologies H3C SecPath F1000-E - Manual (Page 886)

21
connections, connection average rate/peak rate, packets received, and packets sent, as shown in Figure
21 .
Figure 21 Statistics
Return to
Server load balancing configuration task list .
Setting Health Monitoring Parameters
Select High Reliability > Load Balance > Health Monitor from the navigation tree to enter the
page as shown in Figure 22 .
Health monitoring falls into six modes: TCP, ICMP, TCP Half Open, HTTP, FTP, and DNS. This section
introduces the five modes supported by server load balancing only: TCP, ICMP, HTTP, FTP, and DNS.
Click the icon of a corresponding mode, and you can enter the page for setting health monitoring
parameters, as shown in Figure 23 .
Figure 22 Health monitoring