H3C Technologies H3C SecPath F1000-E - Manual (Page 138)

4
Table 3 Interface member configuration items
Item Description
Interface Member
Select the interface to be configured.
The interface list contains all valid Layer 3 interfaces.
Virtual Device
Specify the name of the virtual device to which the current interface belongs
Select the target virtual device name in the drop-down list to add the current interface to
the target virtual device.
You need to create the virtual devices before they can be selected in Device
Management > Virtual Device > Configuration.
Return to Virtual device configuration task list .
Adding VLANs to a Virtual Device
Select Device Management > Virtual Device > VLAN, and the VLANs that belong to all the
current virtual devices are displayed, as shown in
Figure 4 .
Figure 4 VLAN members
Table 4 shows the VLAN member configuration items.
Table 4 VLAN member configuration items
Item Description
Virtual Device
Select the virtual device to be configured.
The virtual device list contains all virtual devices that have been created, including the
virtual root device.
VLAN Range
Configure the VLAN members to be added to the current virtual device.
Click the icon in the Operation column corresponding to the virtual device to be
configured, and type the VLAN range for the virtual device in the VLAN Range
column.
You cannot configure a VLAN range for the virtual root device.