Internal server configuration example, Network requirements, N in – H3C Technologies H3C SecPath F1000-E User Manual
Page 459: Figure
18
Figure 18 Configure dynamic NAT
•
Select GigabitEthernet0/1 for Interface.
•
Type 2001 in ACL.
•
Select PAT for Address Transfer.
•
Type 0 in Address Pool Index.
•
Click Apply.
Internal Server Configuration Example
Network requirements
As illustrated in
, a company provides two Web servers and one FTP server for external users
to access. The internal network address is 10.110.0.0/16. The internal address for the FTP server is
10.110.10.3/16, for the Web server 1 is 10.110.10.1/16, and for the Web server 2 is 10.110.10.2/16.
The company has three public IP addresses from 202.38.1.1/24 through 202.38.1.3/24. Specifically,
the company has the following requirements:
•
External hosts can access internal servers using public address 202.38.1.1/24.
•
Port 8080 is used for Web server 2.
Figure 19 Internal server network diagram