H3C Technologies H3C SecPath F1000-E - Manual (Page 140)

6
Figure 7 Network diagram for virtual device configuration
VD_B VD_A
Internet
Customer A Customer B
GE0/2 GE0/1
Device
Configuration procedure
Step1 Create virtual devices.
# Create VD_A.
• Select Device Management > Virtual Device > Configuration from the navigation tree,
and then click Add to enter the page below.
Figure 8 Create VD_A
• Type virtual device ID 2.
• Type virtual device name VD_A.
• Click Apply.
# Create VD_B.
• Click Add on the Add Virtual Device page, as shown in Figure 9 .