Creating an acl – H3C Technologies H3C SecPath F1000-E User Manual
Page 483

5
Table 2 ACL configuration task list
Task Remarks
Required
The category of the created ACL depends on the ACL
number that you specify.
Configuring an Advance ACL Rule
Configuring an Ethernet Frame Header ACL Rule
Required
Complete one of the three tasks according to the ACL
category.
Optional
Necessary only when the ACL contains a large
number of ACL rules.
IMPORTANT:
Only basic IPv4 ACLs and advanced IPv4 ACLs
support ACL acceleration.
Creating an ACL
After you select Firewall > ACL from the navigation tree, all existing ACLs will be displayed in the right
pane, as shown in
. Click Add to enter the ACL configuration page, as shown in
.
Figure 1 ACL list
Figure 2 ACL configuration page
describes the configuration items for creating an ACL.