H3C Technologies H3C SecPath F1000-E - Manual (Page 208)

15
Task Remarks
Configuring MSTP Globally
Optional
Enable MSTP globally and configure MSTP parameters.
By default, MSTP is enabled globally, and all MSTP parameters adopt the
default values.
Configuring MSTP on a Port
Optional
Enable MSTP on a port and configure MSTP parameters.
By default, MSTP is enabled on a port, and all MSTP parameters adopt the
default values.
Configuring an MST Region
Select Network > MSTP > Region from the navigation tree to enter the page as shown in Figure 6 .
Figure 6 MSTP region
Click Modify to enter the MSTP Region Configuration page, as shown in
Figure 7 .
Figure 7 Modify an MSTP region
Table 8 describes the configuration items of configuring an MST region.