H3C Technologies H3C SecPath F1000-E - Manual (Page 548)

40
Step4 Configure a QoS policy
# Create a policy named dscp, and configure class-behavior associations in the policy.
• Select Firewall > QoS > Policy from the navigation tree, and click Add. Perform configuration
on the page shown in Figure 48 .
Figure 48 Create a policy named dscp
• Type dscp as the policy name.
• Click Apply.
• Select dscp from the Policy Name drop-down list above the policy list and then click Add
Relation. Perform configuration on the page shown in
Figure 49 .
Figure 49 Configure class-behavior associations for the policy named dscp
• Select af11_class from the Classifier Name drop-down list.
• Select af11_behav from the Behavior Name drop-down list.
• Click Apply.
• Select dscp from the Policy Name drop-down list and then click Add Relation. Perform
configuration on the page shown in
Figure 49 .
• Select af21_class from the Classifier Name drop-down list.
• Select af21_behav from the Behavior Name drop-down list.
• Click Apply.
• Select dscp from the Policy Name drop-down list and then click Add Relation. Perform
configuration on the page shown in Figure 49 .
• Select ef_class from the Classifier Name drop-down list.
• Select ef_behav from the Behavior Name drop-down list.
• Click Apply.
Step5 Apply the policy to an interface
# Apply the policy named dscp to the outgoing packets of GigabitEthernet 0/1.