H3C Technologies H3C SecPath F1000-E User Manual
Page 273
5
NOTE:
Type NOTE text here. Before configuring DDNS on Device, register at http://www.3322.org/, add
Device's host name-to-IP address mapping to the DNS server, and make sure that the devices are
reachable to each other.
# Enable dynamic domain name resolution.
•
Select Network > DNS > Dynamic from the navigation tree, and performs the following
operations, as shown in
.
Figure 19 Enable dynamic domain name resolution
•
Click on the Enable radio button for Dynamic DNS.
•
Click Apply.
# Configure the DNS server address.
•
Select Network > DNS > Dynamic from the navigation tree, and then click Add IP. Perform
the following operations, as shown in
.
Figure 20 Configure the DNS server address
•
Type 1.1.1.1 in DNS Server IP Address.
•
Click Apply.
# Configure DDNS.