H3C Technologies H3C SecPath F1000-E User Manual
Page 604
12
Figure 14 Allow the host public to access the external network at any time
•
Select Trust as the source zone and Untrust as the destination zone.
•
Select public as the address.
•
Select Permit as the filter action.
•
Select the Status check box.
•
Select the Continue to add next rule check box.
•
Click Apply.
# Configure an access rule to deny the access of all the other hosts to the external network during
working time.
•
After the last configuration step, you will enter the interzone policy rule configuration page, with the
source and destination zone selected for the last rule. Perform the configurations shown in
.
This manual is related to the following products: