H3C Technologies H3C SecPath F1000-E - Manual (Page 571)

7
Item Description
QQ Session Aging Time Specify the QQ session aging time
SIP Session Aging Time Specify the SIP session aging time
Return to Configuring basic session management settings .
Displaying Session Table Information
To display session table information, select Firewall > Session Table > Session Summary from
the navigation tree. The session table is as shown in
Figure 2 .
Figure 2 Session table
Table 2 depicts the fields of the session table.
Table 2 Fields of the session table
Item Description
Init Src IP Source IP address and port number of packets from the session initiator
Init Dest IP Destination IP address and port number of packets from the session initiator
Init VPN VPN/VLAN/INLINE
VPN instance that packets (from the initiator to responder) belong to and the
VLAN and INLINE that the packets belong to during Layer 2 forwarding
Resp Src IP Source IP address and port number of packets from the session responder
Resp Dest IP Destination IP address and port number of packets from the session responder
Resp VPN
VPN/VLAN/INLINE VPN instance that packets (from the responder to initiator) belong to and the
VLAN and INLINE that the packets belongs to during Layer 2 forwarding
Protocol Transport layer protocol type or number
Session Status
Session status, including Accelerate, SYN, TCP-EST, FIN, UDP-OPEN,
UDP-READY, ICMP-OPEN, ICMP-CLOSED, RAWIP-OPEN, and
RAWIP-READY