H3C Technologies H3C SecPath F1000-E - Manual (Page 520)

12
Table 3 Configuration items of creating a class
Item Description
Classifier Name
Specify a name for the classifier to be created.
Ensure that the name is different from those of the
system-defined classifiers, if any.
Operation Type
Specify the logical relationship between rules in the
classifier. Two options are available:
• And: Specifies the relationship between the rules in
a class as logical AND. That is, the device
considers a packet as belonging to a class only
when the packet matches all the rules in the class.
• Or: Specifies the relationship between the rules in
a class as logical OR. That is, the device considers
a packet as belonging to a class as long as the
packet matches one of the rules in the class.
Configuring classification rules
Click the icon in the Operation column for the class to be configured in the class list to enter the
page as shown in Figure 8 . On the upper part of the page, you can modify the basic information of the
class; on the lower part of the page, information about all rules of the class is displayed. Click Create
to enter the page for creating a classification rule for the class, as shown in
Figure 9 .
Figure 8 Classification rule configuration page