Verification – H3C Technologies H3C SecPath F1000-E User Manual
Page 669
11
# Apply the configured QoS policy to the inbound direction of GigabitEthernet 0/1.
•
Select Firewall > QoS > Apply from the navigation tree and click Apply Policy. Perform
configuration as shown in
.
Figure 18 Apply the QoS policy to the inbound direction of interface GigabitEthernet 0/1
•
Select GigabitEthernet0/1 from the Interface Name drop-down list, select policy1 from
the Policy Name drop-down list, select inbound from the Direction drop-down list, and then
click Apply.
Verification
After completing the configuration, try to use the BT and eMule/eDonkey clients to download files on
hosts in the internal network. If the configuration is correct, the download attempts will be denied. Then,
select Identification > P2P Identify > Traffic Statistics from the navigation tree to view P2P
traffic statistics.