H3C Technologies H3C SecPath F1000-E - Manual (Page 568)

4
Task Remarks
Displaying Session Statistics Per IP Address
Display session statistics based on the specified
source or destination IP address.
IMPORTANT:
Before performing this task, be sure to enable
session statistics collection based on
source/destination IP address.
Displaying Session Statistics Based on Security Zone
Display session statistics based on the specified
source or destination security zone.
IMPORTANT:
Before performing this task, be sure to enable the
session statistics collection based on
source/destination security zone.
Configuring Basic Session Management Settings
To configure basic session management settings, select Firewall > Session Table >
Configuration from the navigation tree. The configuration interface is shown in
Figure 1 .