H3C Technologies H3C SecPath F1000-E - Manual (Page 595)

3
Figure 1 List of interzone policy rule list
Figure 2 Interzone policy rule configuration page
Table 2 describes the configuration items for configuring an interzone policy rule.
Table 2 Interzone policy rule configuration items
Item Description
Source Zone Specify the source zone for the interzone policy.
Dest Zone Specify the destination zone for the interzone policy.
Description Describe the ACL rule in brief.
Source IP Address
Configure a source address resource for the rule by creating an address resource or
referencing an existing address resource.
• If you select the New IP Address option, you need to specify an IP address and
wildcard. After you apply the configuration, the system will automatically create a
subnet address resource. For example, if you enter 1.1.1.1/0.0.0.255, a subnet
address resource is created with the resource name being 1.1.1.1/0.0.0.255.
• If you select the Source IP Address option, you can choose an existing
address resource from the drop-down list or click Multiple to select more. The
available address resources are configured in the page brought up by selecting
Resource > Address. For more information, see Address Resource
Configuration.