H3C Technologies H3C SecPath F1000-E - Manual (Page 600)

8
Configuring ACL Acceleration
Select Firewall > Security Policy > Interzone Policy Accelerate from the navigation tree to enter
the page as shown in Figure 8 .
Figure 8 ACL acceleration
You can enable or disable acceleration for an ACL through the ACL Acceleration column:
• indicates that the ACL is not accelerated. You can click the Start
Accelerating link to enable ACL acceleration.
• indicates that the ACL is accelerated. You can click the Stop Accelerating
link to disable ACL acceleration.
• indicates that the ACL has been modified after it was configured with ACL
acceleration. You can click the Start Accelerating link to enable ACL acceleration again,
making changes to the ACL take effect.
Return to Interzone policy configuration task list .
Displaying Packet Statistics of an Interzone Policy
Select Firewall > Security Policy > Policy Matching Statistics from the navigation tree to enter
the page as shown in
Figure 9 . Select the source and target zone, and then click Search. The page
displays the results matching the search conditions. Click Reset in the Operation column to clear the
packets statistics of the related interzone policy and at this time the system starts to perform statistics
again.
Figure 9 Statistics of an interzone policy
Table 4 describes the items of the statistics.
Table 4 Items of the interzone policy statistics
Item Description
Permitted Packets
Number of packets that match the interzone policy and are therefore
forwarded during the statistics time
Denied Packets
Number of packets that match the interzone policy and are therefore
dropped during the statistics time