H3C Technologies H3C SecPath F1000-E - Manual (Page 900)

35
Item Remarks
Connection Limit Maximum number of concurrent connections on a logical link
Logical Link Group The logical link group to which a logical link belongs
Physical Link The physical link corresponding a logical link
ACL
ACL configured for a logical link. To configure an ACL, select Firewall >
ACL.
IMPORTANT:
This option can take effect only when you select the Enable Policy check
box in virtual service.
Advanced
Configuration Associated
Services
The remote IP address to be associated when health monitoring is performed
on the logical link, that is, health monitoring of the logical link is successful only
when the health monitoring of both the logical link and specified remote IP
address is successful.
IMPORTANT:
If the health monitoring type configured in a logical link group is TCP Half
Open, the port number configured in on the associated servers does not take
effect.
Return to
Outbound link load balancing configuration task list .
Enabling Slow-Offline
Select High Reliability > Load Balance > Link Load Balance > Outbound from the
navigation tree, and then click Logical Link to enter the page as shown in
Figure 34 . Click the icon
of the target logical link to enter the Modify Logical Link page, and then click the Advanced
Configuration expansion button, as shown in
Figure 36 .