H3C Technologies H3C SecPath F1000-E - Manual (Page 590)

2
Figure 19 Connection limit policies
Table 11 describes the configuration items for a connection limit policy.
Table 11 Connection limit policy configuration items
Item Description
Source IP
Source Mask
Source VPN
Specify the source IP address, mask, and VPN.
• If you specify neither source IP address nor mask, the configuration limits the
number of connections from all hosts in the source network.
• If you do not specify any source VPN, the configuration limits the number of
connections from the host or network segment on the public network.
Destination IP
Destination Mask
Destination VPN
Specify the destination IP address, mask, and VPN.
• If you specify neither destination IP address nor mask, the configuration
limits the number of connections to all hosts in the destination network.
• If you do not specify any destination VPN, the configuration limits the
number of connections to the host or network segment on the public
network.
Protocol Select the protocol type for connection limit.
Max Connections Type the maximum number of allowed connections.
Limit By
Select the criterion for connection limit:
• Source: Limits the number of connections based on source IP address.
• Destination: Limits the number of connections based on destination IP
address.
• Source-destination: Limits the number of connections based on source IP
address and destination IP address.
• Subnet: Limits the total number of connections through the device.