H3C Technologies H3C SecPath F1000-E - Manual (Page 906)

41
Health monitoring falls into six modes: TCP, ICMP, TCP Half Open, HTTP, FTP, and DNS. This section
introduces the two modes supported by link load balancing only: ICMP and TCP Half Open. Click the
icon of a corresponding mode, and you can enter the page for setting health monitoring parameters,
as shown in Figure 43 .
Figure 42 Health monitoring
Figure 43 Modify health monitoring parameters
Table 18 describes the configuration items for setting health monitoring parameters.
Table 18 Configuration items for setting health monitoring parameters
Item Remarks
Health Monitoring A method to be used in health monitoring
Check Interval The interval at which health monitoring is performed.
Timeout Timeout for each health monitoring operation
Retry Times
When the retry times is n, if health monitoring is performed for n times, and the
corresponding server or port is unavailable, the health monitoring of this type is
considered failed.
Return to
Outbound link load balancing configuration task list .
Return to Inbound link load balancing configuration task list .