H3C Technologies H3C SecPath F1000-E - Manual (Page 887)

22
Figure 23 Modify health monitoring parameters
Table 6 describes the configuration items for setting health monitoring parameters.
Table 6 Configuration items for setting health monitoring parameters
Item Remarks
Health Monitoring A method to be used in health monitoring
Check Interval The interval at which health monitoring is performed.
Timeout Timeout for each health monitoring operation
Retry Times
When the retry times is n, if health monitoring is performed for n times, and the
corresponding server or port is unavailable, the health monitoring of this type is
considered failed.
URL
URL to be accessed in HTTP health monitoring. It must begin with “/”, and is case
sensitive. For example, /test.html.
This parameter is available only on the page for setting HTTP health monitoring
parameters.
Username
Password
A case sensitive username and password used for logging
in to an FTP server in FTP health monitoring
Filename
Filename to be downloaded from the FTP server in FTP
health monitoring, which is case sensitive. The file with this
name must be put under the main directory of the login
host.
These three parameters
are available only on the
page for setting FTP
health monitoring
parameters.
Hostname
Domain name to be resolved in DNS health monitoring
The default hostname is A.ROOT-SERVER.NET.
Host IP
A DNS health monitoring is considered successful only
when the specified host IP address is contained in the
received DNS result packet if the host IP address is
specified, thus to enhance the precision of DNS health
monitoring.
These two parameters are
available only on the
page for setting DNS
health monitoring
parameters.
Return to
Server load balancing configuration task list .