H3C Technologies H3C SecPath F1000-E User Manual
Page 518
10
Table 2 QoS policy configuration task list
Task Remarks
Optional
This task creates a class and configures classification rules
for the class.
The system-defined classes include default-class, ef,
af1, af2, af3, af4, ip-prec0, ip-prec1, ip-prec2,
ip-prec3, ip-prec4, ip-prec5, ip-prec6, ip-prec7,
mpls-exp0, mpls-exp1, mpls-exp2, mpls-exp3,
mpls-exp4, mpls-exp5, mpls-exp6, and
mpls-exp7. A system-defined class cannot be modified
or deleted.
Configuring a Traffic Behavior
Optional
This task creates a traffic behavior and configures actions
for the traffic behavior.
By default, the system-defined traffic behaviors include ef,
af, be, be-flow-based, and so on. A system-defined
traffic behavior cannot be modified or deleted.
Optional
This task creates a QoS policy and configures
class-behavior associations for the QoS policy.
By default, the system-defined policy is policy default.
The system-defined policy cannot be modified or deleted.
IMPORTANT:
A class can be associated with only one traffic behavior
in a QoS policy. If a class is associated with multiple
traffic behaviors, the last associated one takes effect.
Applying the Policy to an Interface
Required
Apply the QoS policy to the specified interface.