H3C Technologies H3C SecPath F1000-E - Manual (Page 262)

5
Figure 3 Static domain name resolution configuration page
Figure 4 Create a static domain name resolution entry
Table 4 describes the static domain name resolution configuration items.
Table 4 Static domain name resolution configuration items
Item Description
Host Name Host name
Host IP Address
IP address that corresponds to the
host name
IMPORTANT:
Each host name corresponds to one IP address
only. If you configure multiple IP addresses for a
host name, the last configured one takes effect.
Return to
Static name resolution table configuration task list .
Configuring Dynamic Domain Name Resolution
Select Network > DNS > Dynamic from the navigation tree to enter the dynamic domain name
resolution configuration page, as shown in
Figure 5 .