H3C Technologies H3C SecPath F1000-E User Manual
Page 664
6
•
Select the signature file named meta_newemule in the Load Signature File area on the
displayed page.
•
Click Load. After the signature file meta_newemule.mtd is loaded, BitTorrent and eMult/eDonkey
are displayed in the Protocol(s) Load area, as shown in
.
Figure 7 Load signature file meta_newemule.mtd
# Enable P2P protocol identification in the trust zone.
•
Select Identification > P2P Identify > Protocol Identify from the navigation tree, and
perform configuration as shown in
.
Figure 8 Enable P2P protocol identification in the trust zone
•
You can see Trust in the Zone column and
in the State Management column.
Click Enable.
# Create a protocol group and add BitTorrent and eMule/eDonkey protocols to the protocol group.
•
Select Identification > P2P Identify > Protocol Group from the navigation tree and click
Add. Perform configuration as shown in
.